Original Britt Drainage Jar
January 2012All Prices are in US Dollars
 |
DDJ #1 Complete Apparatus: Three piece jar assembly, aluminum back-up screen, set of gaskets, laboratory support stand, control unit, motor, chuck, shaft and propeller unit, flow control assembly, right-angle support arm with thumb screw, locking collar, standard screens (125P) and operations manual. $5,600.00 |
|
|
DDJ#2 Complete Apparatus, Vaned: Same as above except the jar barrel is fitted with three vertical vanes for increased turbulence. This is recommended for matching retention of tissue and twin-wire machines. $5,650.00 |
|
DDJ#3 Dynamic Jar Assembly: Three piece jar assembly, flow control assembly, aluminum back-up screen, set of gaskets, right-angle support arm with thumb screw, standard screens, locking collar and operations manual. $1,600.00 |
|
DDJ#4 Dynamic Jar Assembly, Vaned: Same as DDJ#3, except that jar barrel is vaned. See DDJ#2. $1,650.00 |
|
DDJ#5 Precision Stirring Equipment: Motor, control unit, chuck, shaft and propeller assembly, clamp, motor bracket and operations manual. $4,950.00 |
|
DDJ#6 Vaned Barrel Only: See DDJ#2. $575.00 |
|
DDJ#7 Laboratory Support Stand: Included in DDJ#1 and DDJ#2 but not in any others. $475.00 |
|
DDJ#8 Aluminum Back-Up Screen $40.00 |
 
|
DDJ#9 Travel Case: Heavy duty, light weight construction with die-cut foam inserts for protection and easy access $1000.00 |
|
DDJ#10 Internal Conversion of Control Unit To 220 Volts $75.00 |
Parts List for DDJ
|
#15-1
Three Piece Jar Assembly: Jar barrel, threaded bottom compartment, and U-shaped support base. $1,350.00 |
|
#15-2 Three Piece Jar Assembly, Vaned $1,400.00 |
|
#15-3 Jar Barrel Only $525.00 |
|
#15-4 Jar Barrel, Vaned $575.00 |
|
#15-5 Threaded Bottom Compartment $550.00 |
|
#15-6 U-Shaped Support Stand $575.00 |
|
|
#15-7 Laboratory Support Stand $475.00 |
|
#15-8 Complete Set of Gaskets $65.00 |
|
#15-9 Right-Angle Support Arm With Thumb Screw $115.00 |
|
#15-10 Locking Collar $95.00 |
|
|
#15-11 Aluminum Back-Up Screen $40.00 |
|
#15-12 Control Unit $3,000.00 |
|
#15-13 Motor $1,850.00 |
|
#15-14 Clamp $38.00 |
|
#15-15 Chuck, Shaft and Propeller Assembly $200.00 |
|
#15-16 Motor Bracket $120.00 |
|
#15-17 Flow Control Assembly $110.00 |
|
#15-18 DDJ Operations Manual $15.00 |
Screens:
metal screens, conical holes, 4 1/2" (10.8cm) disk
| Type No. | Hole Diameter (µ) | Mesh Equivalent | Open Area (%) | Price |
|---|---|---|---|---|
| 125W: | 20 | 500 | 1.0 | $55.00 |
| 60W: | 38 | 325 | 1.0 | $55.00 |
| 125P: | 76 | 200 | 14.5 | $85.00 |
| 100P: | 80 | 125 | 14.5 | $50.00 |
| 125M: | 100 | 140 | 22.5 | $50.00 |
| 100M: | 127 | 120 | 22.5 | $50.00 |
| 80M: | 157 | 100 | 22.5 | $55.00 |
| 60P: | 170 | 80 | 14.5 | $50.00 |
| 60M: | 210 | 70 | 22.5 | $50.00 |
| 60K: | 250 | 60 | 32.5 | $50.00 |
| 40M: | 310 | 50 | 22.5 | $50.00 |
| 25K: | 600 | 30 | 32.5 | $50.00 |
